Closures & Venting
Designed to seal gaps in metal roofing, window and door installations, closures when compressed will become a water, pest, wind and dust barrier in valley, hip and other panel-to-panel or panel-to-trim applications. Closures can also be used to close gaps around windows and doors to help increase the energy efficiency of your building. Ridge vents are installed at the peak of a sloped roof, allowing damp, warm air to escape from the attic. A properly installed ridge vent increases energy efficiency and prolongs the life of your roof. Ventilation products are designed to cool the attic, pushing out the hot attic air and rushing in a flow of cool outside air, saving energy and prolonging the life on your roof.




Closures
Emseal® AST High Acrylic Closure Tape
• Open cell polyurethane foam with acrylic impregnation emulsion
• Self-adhering
• Will not dry out and become hard
or brittle
• Maintains long-term sealing contact
• UV-stable and highly resistant to
aging and vermin
• Will not extrude from between
joints when squeezed
• Can be used in moving expansion/
contraction type joint ±25%
• Available in:
- widths of 3/8”- 3"
- compressed thickness 3/32” - 2"
- expanded thickness 3/8" - 4"
Ridge Vents


Peel & Seal® Self Stick Roll Roofing
• Aluminum composite foil and
polymer
• Rubberized asphalt adhesive
back that sticks to almost any
surface
• Won’t tear, crack or dry out over time
• Works on low-slope or pitch roofs • Designed to reflect heat and
resist water
• Secure and waterproof seal
• High wind tolerance
• Available in white, almond,
aluminum and gray
• Miami-Dade NOA 16-0728.22
• Available 45 mils thick in 33-1/2 ft
rolls of 36”, 18”, 12”, 9”, 6”, 4", 3"
• 10-year limited warranty
Universal (Expanding) Closure Rolls
• 40-year universal closure roll
• Easy-to-peel adhesive and
starter strip
• Long-life UV protection
• Impenetrable by water
• Doesn’t stain or scratch panel
finish
• Available in 20-foot lengths of:
1” x 1”, 1-1/2" x 1-1/2”, 2” x 2”
Premium Profile
Closure Strips (Die-Cut)
• Inside and outside closures
• Die-cut to fit exact panel profile
• Polyethylene foam with UV protection
• Won’t scratch painted metal surfaces
• Interlocking dovetails for secure
end to end fit
• Temperature resistant from
–90º to 200º+ F
• Available with adhesive for easy
installation
• Available for EMAX, PBRMAX,
and VMAX profiles


Ventilation
ProfileVent™ Cut-to-Fit Ridge Vent
​• Pre-cut to fit any profile
• Fits under any ridge cap
• Fits any roof pitch 2:12–20:12
• Glue spots prevent slipping
during installation
• Won’t crack, dent or rust during
installation
• One-person installation
• Lifetime limited warranty
• Available in 50-ft. rolls in
packages of 2
Razorback Universal Ridge Vent
• Considered the industry’s easiest
metal roofing ridge to install
• Designed for roof pitch from
2:12–20:12
• Fits most panels with 1/2" – 1-1/4” ribs
• Polyurethane foam
• Wind-driven rain resistant to 110 mph
• UV stabilized and fire retardant
• Won’t scratch painted metal surface
• Florida Product Approved
FL #4640-R4
• Miami-Dade TAS 100A
• 40-Year limited warranty
• Available in 10-ft. rolls in sizes
1-1/2”x2”, 1-3/4”x2”, 2”x2”
Attic Breeze®
Solar Attic Fan
• All-metal zincalume alloy construction
• Whisper-quiet operation
• Windstorm resistant to 170 mph
• UltraFlo® technology for
maximum airflow production
• Monocrystalline solar cells for
optimum power production
• Florida Product Approved
#13339.1 - #13339.7
• Lifetime Warranty
• Available in 20W, 30W and 40W
Gooseneck Vent
• Usually terminate at roof exhaust
or ventilation fans
• Galvanized 26ga. steel or
aluminum
• 3”-wide mounting flange
• Pre-cut holes for ease of
installation
• Roof pitch min 4:12
• Installation height max 33-ft.
• Florida Product Approved
FL16918-R2
• Available in 4”, 6” and 10”