Pipe Boots & Flashing

Pipe boots, also known as vent boots or boot jacks, and other flashing products are used to waterproof pipe penetrations of a roof, such as electrical and plumbing vent pipes. A watertight seal around these areas is critical to the long-term leak-free performance of a metal roofing system.

Master Flash® 35-Year ICC Pipe Boot

• EPDM
Resists temperatures -67º to 275 ºF
• Absorbs vibration and pipe
  movement
• Fits virtually all panel profiles and
   roof pitches
• Adjustable for pipe sizes
   1/8” to 28-1/2”
• Florida Code Approved

• 35-year warranty

Master Flash® Multiport Pipe Flashing

• EPDM (Gray or Black)
• 4 Cable Ports up to 3/8”(2)
  and 3/4”(2)
• 1 Center Port up to 1-15/16”
• Allows up to 4 cables or wires
• Advanced ozone resistance to
  70 hours @ 500 pphm
• EPDM temperature resistance:  
   -Low -67º F

  -High Intermittent +275º F

  -High Continuous +212º F
• 20-year warranty

Standard Square Base Pipe Boot

• EPDM (Gray or Black)
• Aluminum fastening flange
• Grooved sealant holding base
• Round or Pyramid Center
• Temperature resistant to 212º F

• Compression set max 25%
• Available to fit pipe sizes
  1/8" to 28-1/2””
Other colors available for special order
• 20-year warranty

Standard Round Base Pipe Boot

• EPDM (Gray or Black) 

• Aluminum fastening flange

• Grooved sealant holding base

• Temperature resistant to 212º F

• Compression Set Max 25%

Available to fit pipe sizes 1/8" to 19”

Other colors available for special order

• 20-year warranty

High Temperature Round Base Pipe Boot

• Silicone (Red or Gray)
• Temperature resistance:  
 

  -100º to 500º F Intermittent and

  437º F Continuous
• Compression set max 50%
• Aluminum Base
• Advanced ozone resistance to
  70 Hour @ 500 pphm
• 20-year warranty

• Available sizes to fit 1/4" to 19”

High Temperature Square Base Pipe Boot

• Silicone (Red or Gray)
• Temperature resistance:   

  -100º to 500º F Intermittent and

  437º F Continuous

• Compression set max 50%
• Aluminum Base
• Advanced ozone resistance to
  70 Hour @ 500 pphm
• 20-year warranty
Available sizes to fit 1/2" to 16-1/4”

Master Flash® Retrofit Square Vent Pipe Boot

• EPDM (Gray or Black)
• Clearly marked for easy sizing
• Plastic fasteners snap together
  in seconds
• Cable tie included
• Resistant to UV, cracking and 
  weathering
• Temperature resistance:  

  -65º to 275º F Intermittent and 
  212º F Continuous
• Available to fit sizes 2-1/4” to 5”
• 20-year warranty

Retrofit Square Base
Pipe Boot

• EPDM (Gray or Black)
• Clearly marked for easy sizing
• Plastic fasteners snap together
  in seconds
• Cable tie included
• Resistant to UV, cracking and
  weathering
• Temperature resistance:  
  -65º to 275º F Intermittent and 
  212º F Continuous
• Available to fit sizes 1/2” to 16-1/4”
• 20-year warranty

Retrofit Square Base High Temperature Pipe Boot

• Red silicone
• Aluminum fasteners snap 
  together in seconds
• Cable tie included
• Resistant to UV, cracking and 
  weathering
• Temperature resistance:  

  -100º to 500º F Intermittent and  

  437º F Continuous
Available to fit sizes 1/2" to 16-1/4”
• 20-year warranty

Dek-Cap™ Universal
End Cap

• Fits standing seam and PBR 
  profiles
• Universal design for left- or
  right-handed seams

• Flexible corrosion-resistant
  aluminum base
• Dual underside ridges for
  maximum sealing protection
• Includes interior panel stop
• Ozone resistant
• Temperature resistant from
  -40º to 250º F Continuous
• 7-1/4” w x 5-3/4” l x 3-5/16” h
• 20-year warranty

Dek-Strip™ Expandable Flashing

• Stretches to any shape, seals
  and stays
• Paintable after installation

Serpentine edges stretch up to 25%
• Temperature resistance of
  -58º to 240º F Continuous
• Includes 1’x4’ termination strip
  and 3”x2” splice tape
• Available in 75-ft. rolls in sizes:
  7”, 9”, 12”

  • Facebook - White Circle
  • Twitter - White Circle
  • Instagram - White Circle
  • YouTube - White Circle

© Extreme Metal Fabricators.